REPLACEMENT REFERENCE
Goulds 3196 Replacement Parts
Replacement wet-end, power-end, sealing, and wear components identified against the exact 3196 pump size, frame, material, and installed configuration.
Identify the Installed Configuration First
A Goulds 3196 part request should begin with the pump size, frame, group, serial or nameplate information, and the component being replaced. Part numbers, position references, drawings, photos, and measured samples reduce the risk of dimensional or material mismatch.
3196 Parts Identification Guide
| Component group | Information to provide | Material or configuration details | Useful evidence |
|---|---|---|---|
| Casing | Pump size and nozzle orientation | Wetted material and pressure requirement | Nameplate, GA drawing, casting marks |
| Impeller | Diameter, rotation, vane configuration | Wetted material and balance requirement | Part number, photo, measured sample |
| Cover or seal chamber | Chamber type and seal arrangement | Wetted material and gasket interface | Section drawing, seal data, dimensions |
| Shaft and sleeve | Frame, diameter, key and thread details | Base material, sleeve material, coating | OEM drawing, used sample, measurements |
| Wear components | Location, running clearance and mating part | Matched material pair and hardness | Part references, clearance data |
| Power-end parts | Frame and bearing arrangement | Lubrication and oil-seal configuration | Frame model, bearing and seal references |
What the RFQ Should Confirm
- Exact pump model, size, group, and frame
- Required part names, quantities, and position references
- Casing, impeller, shaft, sleeve, and ring materials
- Seal chamber, mechanical seal, and gasket interfaces
- Critical dimensions or drawing revision when available
- Inspection, material certificate, and marking requirements
Related Technical Paths
Send the Model, Drawing, or Parts List
Compatibility and material suitability are reviewed against the information available for the installed equipment and service.