Goulds 3196 Replacement Pump Solutions
A documented ANSI process pump and parts range for installed Goulds 3196 applications, subject to model, duty, material, and dimensional review.
Product overview
G196 covers commonly requested STX, MTX, LTX, and XLTX frame families. Begin with the installed pump size, frame, nameplate, parts list, or drawing. Engineering review confirms the proposed configuration before quotation.
- Open-impeller design with external adjustment
- Standard, large, and taper-bore seal chamber options
- Bronze or stainless-steel labyrinth bearing isolators
- Multiple shaft and shaft-sleeve arrangements
- Replacement coverage for selected wet-end and power-end components
OEM interchangeability is reviewed, not assumed
Goulds and 3196 references identify the installed equipment and cross-reference target. They do not by themselves confirm fit. Verify size, frame, casing and impeller dimensions, shaft and seal arrangement, nozzle and baseplate interfaces, material, speed, and hydraulic duty.
Technical specification
| Parameter | Published or project basis |
|---|---|
| Maximum published capacity | 7,000 US gpm / 1,364 m³/h |
| Maximum published head | 730 ft / 223 m |
| Maximum published temperature | 700°F / 371°C |
| Maximum published pressure | 375 psig / 2,586 kPa |
| Frame coverage | STX, MTX, LTX, and XLTX |
Material options
- CF8M / 316 stainless steel
- CD4MCu duplex stainless steel
- Hastelloy B and C
- Nickel, Titanium, and Zirconium for reviewed services
- WCB for suitable non-corrosive services
Application review
- Chemical process duties
- Hydrocarbon and refinery services
- Pulp and paper process streams
- Water and industrial utility service
- Corrosive or erosive services after material review
Datasheet and RFQ inputs
Existing technical resources
Files are served from the current ANSI Pumps Pro production media library.
ANSI Pumps Brochure PDFPerformance Curves PDFInclude with the request
Send confirmed facts and identify unknowns.
- Pump manufacturer, model, size, group, and serial number
- Flow, total dynamic head, speed, fluid, temperature, and solids
- Material, impeller diameter, seal chamber, and mechanical seal details
- Nameplate photos, parts list, drawings, or failed sample dimensions
- Motor, coupling, nozzle, baseplate, and installation constraints
Frequently asked questions
Can fit be confirmed from the model name alone?
No. The review also requires the exact size or group, configuration, materials, interfaces, and available dimensional evidence.
Can an existing OEM part number be used?
Yes. Provide the complete number and any drawing, bill of materials, nameplate, or photograph available. The number is a starting point for cross-reference review.
How are material options selected?
Material review considers fluid chemistry, concentration, temperature, pressure, solids, corrosion history, and the applicable component.
When is a curve or datasheet issued?
The documentation basis is defined after the duty point and proposed pump configuration are reviewed. Project-specific documents are included when stated in the quotation scope.
Send the model, duty point, or drawing
Provide the available pump identity, operating conditions, materials, and interface data so the replacement scope can be reviewed before quotation.
Request a Quote